PixelPipe Clip for PVC and PixelPipe Track

Home > DIY Cables / Mounting / Misc > House Outline and Misc Pixel Mounting Hardware >

PixelPipe Clip - Clear Lexan 1/2" Pipe Mounting Clip V2 / Mounts RGB Strips and Modules to Fascia, Soffit, Roofs and Walls (Single Clip)

PRODUCT PHOTO: Clear Lexan 1/2" Pipe Mounting Clip V2 / Mounts RGB Strips and Modules to Fascia, Soffit, Roofs and Walls (Single Clip)

PVC Pipe, Lights, Zip Ties Not Included
1.5" Screw is Optional

Additional Photos:

$.69 for 5 to 49 / $.62 for 50 to 99 / $.59 for 100+

5 to 49 Count Price: $0.69

(Minimum order): 5

Availability / Ships: Usually Ships in 24 Hours
Product Code: 770

To Attach Clip to Most Surfaces (optional)

I'll provide my own screw(s) for the clips
1 of Self Tapping 1.5" Screw (for Clip Attachment to Most Wood Sub-straits) [Add $0.05]

Qty:

[Product Description Page]

[FAQ & Documentation Page]

This clip was designed to allow you to mount 1/2" PVC pipe to a structure (roofs, fascias, window surrounds, stucco). Then, RGB strip, modules or bulbs are mounted to the 1/2" PVC pipe and the entire assembly just "pops" into the clips mounted to the substrate.

Why Not To Use PVC Clips

Pixel Strip Mounted With Clips

Clips used with PixelTrim Product

Product Features
Advantages:

A super high performance USA produced resin is now standard on the version 2 of this clip. This new resin is three times more UV resistant, more flexible to prevent cracking than version 1 clips.
Designed for 3+ years of outdoor use. Standard PVC clips (which we no longer sell) only typically last a single season as they are not UV resistant and will break when installing pipes.
Allows you to build your entire lighting structure safely at the ground
Reduces the amount of time required on the roof or ladder to perfectly mount your lights
Lights can be perfectly spaced and angled, on the ground, without depending on shingle or gutter clips that might not even work with pixel lighting
Securely holds PVC pipe to prevent rotation of pipe, ensuring that lights face the exact direction you want them pointing - towards your audience
Uses cheap and light PVC pipe
Clips are clear but can be painted with Krylon Fusion for Plastics paint prior to installation to match roof shingles, fascia or other mounting substrates for year-round mounting
While this product is not intended for use with 1/2" EMT conduit (we recommend using schedule 80 PVC instead where strength is an issue), which is .706" OD compared to 1/2" PVC which is .840" OD - the clip can be used with 1/2" EMT. Here are the holding strengths (at 78 degrees f with sufficient screw):
- Aluminum PixelPipe(tm) Pre-Drilled Pipe
- 1/2" PVC Pipe - 18 pounds per clip
  - Compatible:
    - ASTM D-2241 / SDR 13.5 / Thinwall
    - ASTM D-1785
  - Non-Compatible:
    - SDR 11 (CPVC)
- 1/2" EMT Conduit - 9.5 pounds per clip

Warnings:

The optional 1-1/2" screw may not be suitable for all mounting locations such as roofs. Ensure that the selected screw is long enough to fully embed into the mounting material to ensure a secure attachment.
Do not depend upon or hold onto PVC mounted pipe to support yourself.

Additional details:

Overall height from bottom of base to top of PVC pipe: 1.14"
Base width: .87"
Maximum screw head width: .35"
Maximum screw head depth: .16"
Maximum screw shank / screw width: .20"
Width of gap at top when 1/2" PVC mounted: .71"
Mounting Surface to Base of Pipe Gap: .30"
Color: Clear (87% light transmission)
Material: Polycarbonate (Lexan) with UV inhibitors

Additional items required/optional:

1/2" (nominal) / .840 OD Actual (thin wall recommended) PVC pipe
Minimum 4" zip ties, 6" recommended (Nylon UV resistant recommended)
Longer screws may be required depending on your specific substrate

You might also be interested in...

Pixel Pipe(tm) Bullet Style Pixel Node Mounting Pipe

Oversized Shipping Cost: $14.75

Add