16 Output Pre-Assembled AC Lighting Controller with Artnet or E1.31 / sACN interfaces Like Light-o-Rama CTB-16 with HinksPix Pro CPU

[Product Description Page]

This controller makes current AC controllers look like they are from the stone age with OLED screen, network switch, built-in test functions, LED output indicates and MORE!

Hands on Demo

Product Features
This 16 output AC based controller is perfect for controlling legacy lights such as C7's, C9's, mini-lights and other 120v AC based lights. This fully assembled controller features:

For complete comparison of our AC controller family and Light-o-Rama, see: https://www.holidaycoro.com/kb_results.asp?ID=183
Fully assembled, tested and Ready2Run
Weatherproof enclosure
This unit ships with an HinksPix PRO CPU
Works with 120v AC power (not compatible with 240v power)
16 dedicated AC outputs
- 2 Banks, specifications PER bank:
  - Input
    - 2 dedicated US type B grounded power input cables with 15 amp fuse per bank
    - Up to 15 amps of power per bank
  - Output
    - 8 outputs per bank
    - 6 amps per output (triacs are rated for 8 amps)
    - Dedicated US / Canadian type B ungrounded output pigtail cable per output
Works with 100% of all Holiday Sequencing Software on the market. See this page for details: https://www.holidaycoro.com/kb_results.asp?ID=122
While this controller uses the same CPU as the DC based pixel controllers, it is not possible to add SPI or Long Range expansion boards to this product in combination with the AC output

Average Rating: Average Rating: 4.5 of 5

Average Rating: 4.5 of 5

4.5 of 5 Total Reviews: 7 Write a review »

0 of 0 people found the following review helpful:

Excellent product and even better customer service	July 27, 2021
Reviewer: Nicki and Ted Eads from Englewood, OH United States

Betsy was incredible at handling any of my shipping concerns. Tech support was great at handling my tech questions. Outstanding experience.

Was this review helpful to you?

0 of 0 people found the following review helpful:

	July 19, 2021
Reviewer: Nicola Minniti from Long Branch, NJ United States

Was this review helpful to you?

0 of 0 people found the following review helpful:

AC only	December 2, 2020
Reviewer: Joel from Painesville, OH United States

This is my first order and I went big with the AC boards. This was purchased as a slave with possibly setting up as a stand along controller.
There was a standoff that had come loose and was laying on the PCB along with two screws. I was able to put them back on, and checked the others screws and two others were also loose. I was told I could return it but it would take 6+ days to get it back.

Was this review helpful to you?

0 of 0 people found the following review helpful:

High Quality Product - Worked as Described	December 1, 2020
Reviewer: Steve W from Roseville, CA, United States

The controller has worked as described, was easy to setup, and to extend. Everything was packaged and assembled well.

I had a little bit of a hard time finding instructions on hooking up my Flood Light Kit with the controller over DMX. The instructions and videos were primarily written for the AlphaPix and while the interfaces are similar, the exact configuration settings and how they apply / map are not straightforward.

After some trial, error, and a couple of support requests I have everything up and working. I even have a set of Light-O-Rama boards daisy-chained over DMX working as well.

Only other suggestion I have is that it would be nice if the enclosure included a standard provision for either an RJ45 or a standard DMX connector or at least a place where one could be mounted, but this is more of a nit-pick or suggestion for an enhancement than a problem with the product.

Was this review helpful to you?

0 of 0 people found the following review helpful:

16 Output / 120 Volt Controller	May 6, 2020
Reviewer: Susan Choate from Atlanta, GA United States

Great quality and price!

Was this review helpful to you?

View All Customer Reviews