Home > DIY Controller Boards > Flex Expansion System Boards (For AlphaPix Evolution & HinksPix CPUs) >

Flex Expansion Board System - 16 Port End-Point Differential SMART Long Range Receiver (Requires Flex Long Range Expansion Board & HinksPix PRO CPU) / Blade Fuse V1
PRODUCT PHOTO: Flex Expansion Board System - 16 Port End-Point Differential SMART Long Range Receiver (Requires Flex Long Range Expansion Board & HinksPix PRO CPU) / Blade Fuse
 
Our Price: $94.95



Availability / Ships: Usually Ships in 24 Hours
Product Code: 951-72

EasyPlug3 Female Pigtails

No Female Pigtails - I Am Using My Own Pigtails or No Pigtails
16 of Female EasyPlug3 Pigtail Cables [Add $16.64]
    - Required to hook directly to HolidayCoro EasyPug3 Pixels
CAT5 Ethernet and Long Range Data Signal Cable

No Data Cable - I'll Provide My Own
25 Foot / 7.6 Meter Green CAT5 Data Cable for Data Signal [Add $5.49]
50 Foot / 15 Meter Green CAT5 Data Cable for Data Signal [Add $8.99]
100 Foot / 30 Meter Green CAT5 Data Cable for Data Signal [Add $18.99]
200 Foot / 60 Meter Green CAT5 Data Cable for Data Signal [Add $42.99]
Click Here For Complete CAT5 List and Accessories
Product Function / Use Confirmation

I have or am purchasing a HinksPIX PRO CPU and Long Range Expansion Board for use with this product
^^^ CLICK THE ABOVE CHECK BOX TO CONFIRM THAT YOU HAVE THE CORRECT HARDWARE TO RUN THIS SMART RECEIVER

Qty:  
[Product Description Page] [FAQ & Documentation Page]
 
.
General Overview of Long Range Technology
Advanced Configuration of Long Range SMART Technology
Product Features
  • Smart Long Range Differential Receiver Board (up to 4 per Expansion Board)
    • Allows up to 15 Smart Long Range Receivers per output (Long Range Expansion Board)
      • Configured by 4 position DIP switch that can be operated with fingers and does not require a tool such as a pen or screwdriver to move
      • DIP Switch chart printed directly on PCB for easy access
    • Outputs can be split (Y) or daisy chained (A > B > C > D > ...) in any combination up to 15 total boards on one single long range output
    • Built-in test mode button (2811 type protocol based pixels) for localized testing of lights
      • Red > Green > Blue
      • White (all pixels on)
      • Black (all pixels off)
      • Test mode instructions printed on PCB for reference
    • Status indicator lights for each output indicating programming status
    • Maximum pixel counts using SMART receivers
      • Up to 680 pixels per output
      • Up to 48 outputs per CPU (over three Long Range Expansion boards)
      • Up to a total maximum pixel count, per CPU of 24,480 pixels.
      • Pixels can be divided up and allocated as needed
      • Up to 2,720 pixels per CAT5 cable
        • Pixels can be allocated per smart receiver up to the 2,720 pixel maximum
        • Example:
          • SMART receiver 1 - 50 pixels on outputs 1-16 / 800 pixels total
          • SMART receiver 2 - 100 pixels on output 1-16 / 1,600 pixels total
          • Total pixel consumption: 800+1,600 = 2,400 of 2,720 total possible pixels used
    • Over the wire updating of firmware allows easy corrections of bugs or improved features to be automatically downloaded to receiver
    • Available in DIY bare board (this page) or fully Ready2Run assembled receivers with a variety of voltage options
    • No need for termination jumpers as each receiver to receiver run is fully amplified and repeated. Allows thousands of feet of CAT5 cable for even the largest displays.
    • The smart receiver will not work without a Flex Long Range Differential Expansion Board (Bare boards and Ready2Run Controller)
    • REGULAR / SMART Receiver mixing
      • It IS possible to use SMART and REGULAR receivers on the same Long Range Expansion board. For example, output 1 and 2 could be REGULAR and 3 AND 4 could be SMART receivers.
      • It is NOT possible to mix SMART and REGULAR receivers on the same CAT5 wire, for example, Long Range Output Port > CAT5 > SMART Receiver > CAT5 REGULAR Receiver is not a possible combination.
      • It is possible to mix 4 and 16 SPI and 16 AC SMART receivers on the same CAT5 wire
    • Requires HinksPix PRO CPU, will not work with AlphaPix Evolution CPU
    • Blown fuse indicators (Red LED light will go out when fuse is blown)
    • 4mm holes for mounting to our long range mounting board kit
    • NOTE: Requires power supply at location of receiver, cannot be powered from expansion board
    • Power indicator light - Red
      • Shows if power from the power supply is being received
    • Pixels
      • Maximum pixels per SPI output: 680 pixels
      • Pixel protocols supported: 2811 / 2812 / 2813 / 2815 / 1904 / 2814 / 28** (and any other "2811" pixel protocol)
    • Data Input
      • One CAT5 Jack
      • Red in color to indicate long range functionality
      • Marked on PCB as "LINE IN"
      • Four LEDs marked 1 2 3 4 for each pair of the 8 wires in the CAT5 line show the status of incoming data to assist in troubleshooting problems with mis-configuration or wiring issues
      • Up to 350 feet of CAT5 cable can be used between the Long Range Expansion output and the Long Range Smart Receiver
      • Requires Long Range Differential Expansion Board for operation, will not work with E1.31 or E1.11 or "DMX 1990" signals
    • Data Output
      • Two CAT5 Jacks
      • Red in color to indicate long range functionality
      • Marked on PCB as "Line Out"
      • Each output is fully repeated and amplified as a new connection, allowing up to 15 daisy chained smart receivers on a single Long Range Expansion output
      • NO terminators are required as each run from the the Long Range Expansion or from Smart Receiver to Smart Receiver is fully isolated
      • Four LEDs located next to SPI output plugs indicate data output on that specific output to help with troubleshooting bad pixel strings
      • Up to 350 feet of CAT5 cable can be used between any receivers, up to the maximum of 15 receivers
    • Power Output
      • 5 Amps Maximum (mini fused blade) per output
      • Wattage per output
        • 5 Volts: 25 Watts
        • 12 Volts: 60 Watts
      • Up to 10 AWG wire (we recommend a minimum of 18 AWG for power inputs - see our website
      • Polarity reversal input protection
      • Voltage Range: 5 to 24v DC
      • Output numbers clearly labeled at PCB
    • Power Input
      • 60 Amps (30 Amps per bank)
      • Voltage Range: 5 to 24v DC
      • Heavy duty screw down connections that support spade terminals
      • Markings for input
        • 5V to 24V - Positive power input (typically red)
        • GND - Ground power input (typically black)
    • Dimensions and Weights
      • Width: 7.67 Inches / 195mm
      • Height: 4.05 Inches / 103mm
      • Weight (board only): .33 pound
  • Warranty
    • 1 Year Warranty on Long Range Receiver
      • Excludes:
        • CPU Board damage as a result of connection to an LOR network
        • Board damage due to improper mounting to a non-conductive surface
        • Environmental damage (water, snow, etc)
        • Physical damage

16 Output SPI Limits with Common HolidayCoro Pixels
Assumes one SMART receiver on one Long Range Expansion Output
WITHOUT Power Injection
100% Duty Cycle
@ 100% Full White Output / May require one power supply per bank
60 Amp input
WITH Power Injection
@ 100% Full White Output / Requires external power supplies)
NOTE: HolidayCoro does not provide or endorse power injection.
Customers should be fully aware of power injection wiring requirements.
Maximum
Per SPI Output
Maximum
Per SPI Expansion Board
Maximum Per SPI Output Maximum Per SPI Expansion Board
30LED/10IC Pixel Strip - 5 Meters
(with pre-attached waterproof connections)
1 16 6 108
30LED/30IC Pixel Strip - 5 Meters 1 16 2 36
48LED/16IC Pixel Strip - 5 Meters 0 0 4 69
60LED/20IC Pixel Strip - 5 Meters 0 0 3 55
60LED/60IC Pixel Strip - 5 Meters 0 0 1 18
8mm/12mm Pixel Node ( bullet or flat/square) - 5v 83 Nodes

1,328 Nodes

170 Nodes 2,720 Nodes
8mm/12mm Pixel Node ( bullet or flat/square) - 12v 111 Nodes

1,776 Nodes

170 Nodes 2,720 Nodes
Rectangle or Square Pixel Modules - 12v 78 Modules
1,248 Modules 170 Modules 2,720 Modules
Brilliant Bulb (single bulb) 125
Bulbs
2,000
Bulbs
170 Bulbs 2,720 Bulbs

You might also be interested in...
Flex Long Range (#951-31) and SPI (#951-21) Expansion Board and 16 SPI Long Range Board (#951-72) to HolidayCoro HC-2500 Base Mounting Kit Flex Long Range (#951-31) and SPI (#951-21) Expansion Board and 16 SPI Long Range Board (#951-72) to HolidayCoro CG-1500 Base Mounting Plate Kit
Our Price: $10.49

Add
Our Price: $11.59

Add
PRODUCT PHOTO: Flex Long Range (#951-31) and SPI (#951-21) Expansion Board and 16 SPI Long Range Board (#951-72) to HolidayCoro HC-2500 Base Mounting Kit PRODUCT PHOTO: Flex Long Range (#951-31) and SPI (#951-21) Expansion Board and 16 SPI Long Range Board (#951-72) to HolidayCoro CG-1500 Base Mounting Plate Kit

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Red Switch April 25, 2022
Reviewer: Robert Castelo from Las Vegas, NV United States  
A Little issues about the red switch. But with the help of David, HolidayCoro tech support. Problem solved  with the one click of the switch. Thanks David.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Works flawlessly, Fast delivery January 28, 2022
Reviewer: Jonathan White from Madison, CT United States  
Even during all the shortages around the globe HC came through quickly with my order. Works perfectly, as advertised. Easy to use.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Yippee!! July 28, 2021
Reviewer: Scotty Creason from FRANKLIN, TN United States  
Ready to rock and roll!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 January 3, 2021
Reviewer: Robert Kostosky from Lewisberry, PA United States  
Great option to use in expanding your display next year.   Easy to setup after watching the available videos.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Perfect December 21, 2020
Reviewer: Michael Carico from North Ridgeville, OH United States  
Love the 16 port smart receiver. Worked perfectly for my mega tree . Could not be happier with ALL my HolidayCoro products .

Was this review helpful to you?

View All Customer Reviews