Product Features
Looking for a method to easily mount your pixel bulb mounting strips?
- Trimable and Expandable - Strips can be cut to shorter lengths or using 4" zip ties can be extended to lengths
- Vertical or Horiztonal - Can be used for installation of horizonal bulbs (outlines, circles, etc) and vertical (covering the face of a house, etc)
- Fast Installation - Installation takes only about 2-4 seconds per bulb. Installation does not require the removal of the lens, just pop it into place.
- Works With All Common C9 Style RGB Pixel Bulbs - Designed to clamp on to the base of most common pixel types with a 7/8" (.87" or 22mm) base "neck"
- Recommended Brilliant Bulb Spacing
Center to Center Bulb Spacing
|
Minimum Number
Strips Required
For 50 Pixels
|
Total Length
Of 50 Bulbs
|
4 Inch / 101.6 mm
|
3
Mounting Strips
|
16.6 Feet
5 Meters
|
8 Inches / 203.2 mm
|
5
Mounting Strips
|
33.3 Feet
10.1 Meters
|
12 Inches / 304.8 mm
|
7
Mounting Strips
|
50 Feet
15.2 Meters
|
- Easy Off-Season Storage - Just take down your Brilliant Bulb Strips and coil them up and place them into a tub - no need to remove the bulbs for storage.
- We recommend purchasing 5% more than actual necessary length to allow for splicing and end connections/terminations
- NOTE: This product does NOT work with Brilliant Bulb Globes (round balls)
- Product Specifications:
- Length: 94 Inches / 239cm
- Width: 1.5" Wide / 38.1mm (variations of -5% to +5% are possible and do not affect product operation)
- Spacing (all are center to center of each pixel) - varies by specific product SKU:
- Bulb Size: .87 / 22mm
- Additional: Two .125" / 3.175 mm Zip tie holes surround each side of the bulb for spicing
- Thickness: ~.060" / 1.5mm thick material
- Light Transmission: Black: 0%
- County of Origin
- Materials/parts: USA
- Assembly/Mfg: USA
- Design: USA
- Revision History
- 06-Jun-16 - Initial design released
- 04-Nov-2024 - White strips have been discontinued
|
Brittle plastic