Home > By Location / Season > By Location - Ground >

RGB Coro Candy Canes for RGB Pixels V2 (Two / Pair)
PRODUCT PHOTO: RGB Coro Candy Canes for RGB Pixels V2 (Two / Pair)
 
Additional Photos:
Single Pair Price: $45.99
2 or More Pairs Only: $39.99



Availability / Ships: Same Day, Sporadically up to 3 days (Delivery Time Information)
Product Code: 260

Coro Candy Cane Lights

32 of Rectangle RGB LED Pixel Modules with 6" Spacing [Add $32.99]
Direction of Cane Hook


For Attaching Controllers/Coro/Lights

15 of Hot Glue Stick (10") [Add $5.40]

Qty:  

  
[Product Description Page] [FAQ & Documentation Page] [Customer Videos Page]
 
The Coro Cane is the perfect accessory for use with retangle pixel modules. Ships two Coro Canes in each order quantity. Select left or right facing candy canes. Each qty purchased is TWO candy canes, both pointing the same direction.
Tom B's Display
Assembly Video (now with rectangle modules)
Adams Family
Product Features
  • Size:
    • 18.5" at the widest point - the hook
    • 45" tall
    • 3" deep
  • Important Note
    • Each qty of item purchased is two of the same direction. For example, if you purchase 1 item, left facing, you will receive two left facing candy canes.
    • If you need left AND right candy canes, add the product twice to the cart, 1 with left and 1 with right, you will then have 2 individual left and 2 individual right candy canes.
  • Mounting
    • Five integrated slots with included Velcro/hook-n-loop tape allows easy mounting to rebar, t-stakes, poles or other vertical supports
  • Lighting requirement
  • Additional features
    • Drain holes along back side at lowest spot in each cell
    • 5 slots for attaching the included velcro
    • Two holes at bottom for power/signal input and output wire
    • Numbered spacers for each cell to ensure even angles throughout design (includes extra in case of mistakes)
    • Black coro base and white translucent sides and top
  • Additional items required to complete
    • Pixel controller (E1.31 or E1.11 based)
    • Hot glue compatible with coro (see here)
    • Mounting pole (re-bar, t-stake or other)
  • Assembly instructions


You might also be interested in...
EasyPlug4 / 4 Conductor / 5ft / Screw Together Extension / Waterproof Male + Female (18 AWG) / RGB Dumb Lights 10" Hot Glue Stick (Single Stick)
Our Price: $3.09

Add
Our Price: $0.79

Add
PRODUCT PHOTO: EasyPlug4 / 4 Conductor / 5ft / Screw Together Extension / Waterproof Male + Female (18 AWG) / RGB Dumb Lights PRODUCT PHOTO: 10" Hot Glue Stick (Single Stick)

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 36 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Good - Pigtails and sleeves December 11, 2024
Reviewer: Guillaume L from Boucherville, QC Canada  
Looks great, but the pigtails don’t come with it. So, don’t forget to order some as well as connectors and shrink sleeve for water proofing your connections.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent December 30, 2021
Reviewer: William Obrien from Manchester, MD United States  
Ordered 4 total with the nodes. First one was a learning experience, the last 3 we're easy. Maybe a total of 4 hours to out all 4 together.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Takes time to assemble but worth it! December 25, 2021
Reviewer: Mike from NORTH BEND, WA United States  
My suggestion, attach the lid with white zip ties. You can’t see them and if there is any issue you can quickly open it up. I also added a few zip ties on the back to hold excess cables to keep my display clean!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Neat idea December 20, 2021
Reviewer: Chuck from MA, United States  
These cane kits are well-made and the instructions are very clear.  The only reason I hesitate to give 5 stars is that they are much dimmer than other props.  Doing it over, I might have doubled the modules per cane; it couldn't have hurt.

These take a lot of time, patience, and a steady hand to assemble, what with soldering the modules onto plugs, and all the cutting and gluing.  I would not have had time to put 16 of them together, but did get the housekeeper to do the gluing, so they're in the show.

They take more power than I thought based on the rating of the modules.  A string of 4 definitely has to have power looped to the far end, and it is of some benefit to insert in the middle also.

The velcro for attaching to a post didn't work out for me, but if you manage to do the rest of the assembly you'll have no problem putting band clamps in later, like I did.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Love the candy canes December 5, 2021
Reviewer: Eric Walls from Gresham, OR United States  
I really like these candy canes. I put them under my mega tree in a little row. They add so much to my display.
They do take a lot of hot glue (don't burn yourself) and a bit of time. Everything is printed out, and easy to follow. If you mess up there is always plenty of material to make a quick repair. Very sturdy when complete, just drive a stake and attach them with the included Velcro. Good design.

Was this review helpful to you?

View All Customer Reviews