Smart / Pixel RGB LED Strip 30 LEDs/m 10 Pixels/m / Pre-Attached 10Ft EasyPlug3 Cable / Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 or 1903 / BRG Color Output Order

Home >

PRODUCT PHOTO: Smart / Pixel RGB LED Strip 30 LEDs/m 10 Pixels/m / Pre-Attached 10Ft EasyPlug3 / xConnect Cable / Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 or 1903 / BRG Color Output Order

Our Price: $17.99

Availability / Ships: Usually Ships in 24 Hours
Product Code: 705-WP

Qty:

[Product Description Page]

[FAQ & Documentation Page]

This product sold only for replacement purposes for customers with prior purchases. If you need more than 8 replacements, please contact us directly. For replacements see:

BRG Color Order + 6in Leader Cable: http://www.holidaycoro.com/product-p/700-white-wp.htm
RGB Color Order + 10ft Leader Cable: http://www.holidaycoro.com/30-10-Pixel-Strip-with-10-Foot-Extension-p/706-wp.htm
RGB Color Order + 6in Leader Cable: http://www.holidaycoro.com/30-10-Pixel-Strip-5-Meters-Waterproof-p/707-wp.htm

Hands on with the product

Product Features

Features
- Please note that these require a smart pixel controller - these will not work with dumb controllers!
- Design for pixel strip MegaTrees removing the need for extension cables
  - See our pixel MegaTree kits that include this type of pixel strip
- Smart / Pixel Strip
- Pixel protocol WS2811 and UCS1903 (supported by every major pixel controller)
- Viewing angle of 120 degrees
- Pre-Attached Waterproof connection
  - 3 Pin cable
  - Input side
    - Male pins
    - Male EasyPlug3 compatible cable
    - Compatible with all Ready2Run controllers
    - 10 Feet (304cm)
  - Output side
    - Sealed
  - Compatible with all HolidayCoro 5, 10 and 20 ft 3 core extension cables (see here for listing of cables)
- White PCB circuit board background
Lights
- Total LEDs per Strip: 150 of 5mm x 5mm (5050) RGB LED Lights
- Total Individually Controllable Sections per Strip: 50 Sections (10 per meter) - each 4" in length, contain 3 RGB LED lights per section
- Total DMX channels required: 150 DMX Channels (50 sections, each with three channels - Red, Green, Blue)
- Color Output Order - BRG
Dimensions
- Overall length is 5 meters or about 16 feet, 6 inches
- Width of strip without protective boot: .393" / 10mm
- Width of strip with protective boot: .492" / 12.5mm
- Height of strip without protective boot: .125"/ 3.18mm
- Height of strip with protective boot: .160" / 4mm
Weather
- Silicone "boot" covers entire length of strip providing typical weather resistance
- Ends are silicone glued to ensure weather tightness
- Not intended for use underwater
RGB LED Chip (5050) Testing Specs:
- 1,000 hours at 212f
- 1,000 hours at 32f
- -40f to 212f over 15 minutes, 40 times without failure
- 50,000 hours (estimated) at 76f
Wiring colors:
- Red = Power Input Anode/+/Positive
- Black = Power Input Cathode/-/Negative
- Yellow = Data Signal
- See photos on this page for pin out map
Power
- 12v DC Input
- White (all three colors) Entire Roll: 3 amps / 36 Watts
- 2.4 Watts per Foot / 7.2 Watts per Meter
Packaging
- Each strip ships on a plastic reel, packed in a plastic, anti-static envelope.
- Wiring instructions are provided on the outside of the envelope.

Lumens Output

The following table is listed PER 5050 LED:

	Minimum	Maximum	Unit
Red	400	600	mcd
Green	1600	2000	mcd
Blue	300	400	mcd

	Minimum	Typical	Maximum	Unit
Red	620	623	626	nm
Green	515	518	521	nm
Blue	465	467	469	nm

Average Rating: Average Rating: 5 of 5