Smart / Pixel RGB LED Node 8mm/12mm / 12v / 2811 / 50 Node String / 3" Spacing / Black / Waterproof EasyPlug3 Input and Output Cables

Home > RGB Lights / Bulbs / Strip & Ribbon > Smart / Pixel RGB Lights - Nodes / Bullets >

Additional Photos:

Our Price: $23.99

Availability / Ships: Usually Ships in 24 Hours
Product Code: 711-WP

EasyPlug3 Female Pigtail for RGB Pixels

None - I am using HolidayCoro Extensions and/or Controllers
1 of Female EasyPlug3 / Start Pigtail Cable / 18 AWG [Add $1.04]
- Not required when used with HolidayCoro extensions and controller systems
1 of Female EasyPlug3 / Start Pigtail Cable / 20 AWG [Add $0.79]
- Not required when used with HolidayCoro extensions and controller systems

EasyPlug3 Male Pigtail for RGB Pixels

None - I am using HolidayCoro Extensions and/or Controllers
1 of Male EasyPlug3 Pigtail Cable / 18 AWG [Add $1.04]
- Not required when used with HolidayCoro extensions and controller systems
1 of Male EasyPlug3 Output / End Pigtail Cable / 20 AWG [Add $0.79]
- Not required when used with HolidayCoro extensions and controller systems

To Plug Unused Female Ends & Pigtails

No Plugs for Unused Female Pigtails

Qty:

[Product Description Page]

[FAQ & Documentation Page]

[Customer Videos Page]

Hands on with the product

Product Features

Features
- Please note that these require a smart pixel controller - these will not work with dumb controllers!
- Smart / Pixel Nodes
- Pixel protocol WS2811 / 1903
- Viewing angle of 120 degrees
- Waterproof input and output connections for easy, no solder connections
- Black wire
Lights
- Total LEDs per node: 3 (Red, Green, Blue)
- Total LED nodes per string: 50
- Total DMX channels required per string: 150 DMX Channels
Dimensions
- Overall Length from node 1 to node 50: 12 feet, 2 inches
- Node to node (center) distance: ~3 inches
- Lead in and lead out wire length: 4 inches (both ends) with EasyPlug 3 waterproof plug
- Maximum diameter of node: 12mm / .47"
- Length of node body: 30mm / 1.21"
- Overall length of node and LED: 1.46"
Weather
- Silicone body/base
- Epoxy sealed body/casing to ensure waterproof wiring and electronics
- IP68
Power
- Pixel direction is marked with arrows on circuit board (input side), male plug is input side
- 12v DC Input
- White (all three colors) per string (50 nodes): 3 amps / 36 Watts @ 12v DC (this amount can vary by temperature, wiring to the string and supply voltage)
- It is possible to run up to 120 of these 12v nodes, in a single string, without power injection other than at the start of the string at 100% output

You might also be interested in...

Our Price: $9.79

Add

Our Price: $3.69

Add

Our Price: $6.49

Add