Home > DIY Cables / Mounting / Misc > Extreme Strip / QuickTree™ Pixel MegaTree Mounting System >

DISCONTINUED: PixNode Classic Strip(tm) - 12mm RGB Node Node Mounting Strips for Pixel MegaTrees
PRODUCT PHOTO:  PixNode Classic Strip(tm) - 12mm RGB Node Node Mounting Strips for Pixel MegaTrees
 
Additional Photos:


Our Price: $0.06 Price: Varies by type, spacing and color
(Minimum order):  10


Availability / Ships: Usually Ships in 24 to 48 Hours
Product Code: 767
Qty:

[Product Description Page]
 
This product has been replaced with this:

https://www.holidaycoro.com/PixNode-Extreme-Strip-for-Pixel-Nodes-p/763.htm

Hands on Demo
How to splice PixNode Strip
For longer lengths
Adam's Family MegaTree on Left at 3 Inch Spacing
3 Pencil Trees in Center at 2 Inch Spacing
Using PixNode Strips for a border outline
Product Features

The absolute key to a well designed and beautiful RGB Pixel MegaTree is ensuring that your pixels are straight and evenly spaced - even just a few mis-aligned or un-evenly spaced pixels can ruin the look of a pixel MegaTree. While strip / ribbon pixels have this as part of their inherent design, nodes have always had a problem getting perfect spacing and alignment. Previous solutions involved complicated and extremely slow taping or zip tying and often then didn't produce perfect results. All these problems with mounting pixel nodes on your MegaTree are now solved and at a price below any other method on the market today with PixNode Strips™.
  • Outdoor Rated - Manufactured from durable, outdoor rated and UV resistant plastic (black material only) on our in-house, computer controlled machines.
  • Durable & Strong - Our strips are 15% thicker and stronger than all other pixel node strip on the market today - hands down the strongest strip on the market today.
  • Black - We offer black which is great for non-reflective lighting and helps to hide light scatter from the rear of pixels.
    • NOTE: We no longer sell clear. See our Extreme Strip White as the closest match.
  • Part of the Integrated QuickTree System - The QuickTree system allows you to use PixNode Strips to build 4 to 60 ft tall strip trees and more - all perfectly designed to work together.
  • No Screws, Bolts, Washers or Tools Required - HolidayCoro invented the original, no-hardware strip version using two simple 4" zip ties - no need to worry about additional bolts to splice together longer lengths.
  • Trimmable to 1" Sections - Each strip can be cut to any length using standard scissors, in increments as small as 1". To create longer lengths, use two, 4" zip ties to create super strong splices (see video on this page for complete details) - without the need to manually punch holes or modify the strip in any way.
  • Designed for High Tension Forces - Designed for 55 pounds of tension and 70 pounds on splice joints using just two nylon zip ties
  • Fast Installation - Installation takes only about 2-4 seconds per node making it the absolutely fastest method on the market today
  • Recommended Nodes and Spacing:
    • Center to Center Pixel Spacing


      Specific Product Link >
      Node Bullet / ~3" Spacing
      (preferred format)

      #711-BLK-WP (12v)
      #710-BLK-WP (5v)

      Node Square / ~3" Spacing
      (non-preferred format)

      #673 (12v) &
      #672 (5v)

      Node Bullet / ~6" Spacing

      #712 (12v)

      1 Inch / 25.4 mm
      (1" Spacing Strip)
      Yes Yes Yes
      (use 3" spacing pixels instead)
      2 Inches / 50.8 mm
      (2" Spacing Strip)
      Yes Yes Yes
      (use 3" spacing pixels instead)
      2.5 Inches / 63.5 mm
      (2.5" Spacing Strip)
      Yes Yes Yes
      (use 3" spacing pixels instead)
      3 Inches / 76.2 mm
      (3" Spacing Strip)
      Yes Yes Yes
      4 Inches / 101.6 mm
      (1" Spacing Strip)
      Skip 3 Holes
      No No Yes
      5 Inches / 127 mm
      (1" Spacing Strip)
      Skip 4 Holes
      No No Yes
      6 Inches / 152.4 mm
      (3" Spacing Strip)
      Skip 1 Hole
      No No Yes
      7 Inches / 177.8 mm
      (1" Spacing Strip)
      Skip 6 Holes
      No No May Stretch Wires
  • No electrical tape - As many have learned, using the "banding and taping" method, results in electrical tape that comes loose in the cold and is extremely time consuming to install and makes repairs a nightmare.
  • Easy "On-Tree" Repairs - On-tree repairs of bad nodes can often be performed without requiring any major disassembly of surrounding nodes.
  • Extensive Termination Options - Strip ends can be attached to a variety of termination points at the top and bottom of your tree. Materials that can be used for termination points include:
    • PVC pipe
    • Eye hooks (round, hook, large or small)
    • Screws
    • Bolts
    • Nails
    • Zip ties
    • See our product video for examples
    • We also offer for selected installations, the PixNode Strain Relief clip.
  • Easy Off-Season Storage - Just take down your PixNode Strip with the nodes installed, coil up and store away in bins or hang from your garage or basement joists. The material is safe to store in temperatures up to 375f.
  • We recommend purchasing 5% more than actual necessary length to allow for splicing and end connections/terminations
  • Product Specifications (both black and clear):
    • Overall Length, Hole Count and Spacing (all are center to center of each pixel):
      • 1" / 25.4mm Spacing
        • Overall Length 95.42" / 242.3cm
        • 95 Holes
      • 2" / 50.8mm
        • Overall Length 95.42" / 242.3cm
        • 48 Holes
      • 2.5" / 63.5mm
        • Overall Length 96.42" / 244.9cm
        • 39 Holes
      • 3" / 76.2mm
        • Overall Length 94.42" / 239.8cm
        • 32 Holes
    • Width: 1.125" Wide / 28.5mm (variations of -3% to +3% are possible and do not affect product operation)
    • Pixel Hole Size: .42 to .44" Pixel Node Hole (slightly undersized from 12mm to ensure a good fit and proper alignment)
      • NOTE: It is a common misconception that the hole size should be "12mm" - if the holes were actually this size the pixels would not stay in the material.
    • Additional: Three .125" / 3.175mm Zip tie holes surround each side of the node for spicing
    • Thickness: ~.038" / .96mm thick material simulates the native steel nodes were designed for use with
    • Light Transmission: Black: 0% / Clear: 92%
  • County of Origin
    • Materials/parts: USA
    • Manufacturing: USA
    • Design: USA
  • Revision History
    • 11-Jan-15 - Initial design released
    • 08-Mar-15 - Clear PixNode strips released
    • 02-Jun-15 - Updated material for HDPE strips and links to QuickTree system
    • 05-Aug-15 - Discontinued Clear PixNode Strips
    • 04-Sept-15 - Added 2.5" spacing
    • 22-Mar-16 - Clear strips re-introduced using newly formulated plastic
    • 01-Feb-18 - Added 2.0" spacing
    • 27-Aug-20 - Discontinued Clear PixNode Strips Again

You might also be interested in...
PixNode QuickStrip Node Installation Tool / Jig for PixNode Classic and Extreme Mounting Strip V2 PixNode Extreme Strip (tm) - Continuous Length Pixel Node Mounting Strip (Sold by the Foot) Bullet Pixel Node Installation Pixel Pusher Pliers
Our Price: $7.99

Add

Price Varies Based On Length, Spacing, Color and Quantity
Discounts on Lengths Over 500 Feet

Add
Our Price: $9.99

Add
PRODUCT PHOTO: PixNode QuickStrip Node Installation Tool / Jig for PixNode Classic and Extreme Mounting Strip V2 PRODUCT PHOTO: PixNode Extreme Strip (tm) - Continuous Length Pixel Node Mounting Strip (Sold by the Foot) PRODUCT PHOTO: Bullet Pixel Node Installation Pixel Pusher Pliers

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 115 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Great product September 28, 2021
Reviewer: Ramon Morales from Harlingen, TX United States  
Hreat quality. Super fast shipping.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 September 26, 2021
Reviewer: alexander quinones from san antonioo, TX United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Easier than doing nothing. July 14, 2021
Reviewer: allen kitchen from Webster, TX United States  
Building a matrix with these is simple.  Build the frame, put pixels in these strips with an extra inch on both ends, and put the strips into the frame.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Good stuff! June 22, 2021
Reviewer: jeff osborne from Cherokee Village, AR United States  
Great price for a great product. Convenient and easy to use, lasts a long time. Can't be beat! Second purchase of this, will not even consider anyone else.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Easy to use with a variety of pixels June 13, 2021
Reviewer: Richard N from Magnolia, TX United States  
The 1 inch spacing works well for me as I can space pixels as needed. Very sturdy and will last for years.  They can easily be cut to length or spliced together for longer lengths.

Was this review helpful to you?

View All Customer Reviews