PRE-SALE: CCR Pixel MegaTree Kit - 16 Strips/Ribbons / 800 Pixels / 2,400 DMX Channels / Ready2Run Assembled / Regular Output

Product Features

This pixel MegaTree includes a completely assembled controller, extension cables and pre-wired lights. If the following tree doesn't meet your requirements, see our other selections of pre-designed Pixel MegaTrees.

	180 Degrees of Coverage
Ideal Viewing Distance From Audience	20+ Feet
Items Suitable for Display	Scrolling text, singing faces, animated graphics
Ease of Sequencing	Moderate - Uses Commonly Available 50 x 16 "CCR' Sequences - see this site
Pixel Counts
Total Pixels per Tree	800
Total RGB LEDs per Tree	2,400
Vertical Sections / Strings	16
Width - Top of Tree	Varies by Installation
Pixel Spacing - Top (Horizontal / Pixel-to-Pixel)	Varies by Installation
Pixel Spacing - Bottom (Horizontal / Pixel-to-Pixel)	Varies by Installation
General
Power Injection Required / Cables per Strand	No / One Cable
Type of pixel used	30 LED / 10 IC-Pixel Per Meter (39")
Assembly
Controller - Pre-wired with power and cables	Fully Assembled
Lights - Pre-wired with waterproof connections	Fully Assembled
Overall erection time for entire tree (with assembled hardware)	Usually 60 to 240 Minutes
DIY Customer assembly time (excludes erection time)	2 Hours (Experienced) 3 to 6 Hours (Novice)
Additional Required Items (Sourced by Customer)
Mounting Hardware	See Instructions Here Varies by Installation
8 Inch to 12 Inch Galvanized Nail / Stakes	16 Typically
Tent Stake / Re-Bar or Similar (Depends on local soil and ground conditions)	Varies by Installation
Guy Wires or Rope	Not Required or Varies
Sequencing Software	Works with 100% of all Holiday Sequencing See compatible software
Computer / Show PC	Requires PC with Ethernet network port (nearly all have this) Type and power of PC depends on sequencing software selected by customer.