PRE-SALE: Flex 32 SPI Output Mega Pixel Controller System + 1,200 to 1,400 Watts Power / Ready2Run Assembled / AlphaPix Evolution or HinksPix Pro CPU / Optional Long Range Expansion (Ships Jan to Jul 2025)

Product Features

General Information
- Available with either the AlphaPix Evolution or HinksPix Pro CPUs
  - Click here for a complete comparison of the individual features of each CPU type
- The system is based on the Flex Expansion Board System which can drive up to three expansion boards
- Designed typically for large commercial installations where a single enclosure box and maximum outputs is required
- Ships with 32 SPI Pixel Outputs Standard, pre-wired to four 350 watt Meanwell Power supplies
  - All power wiring including input and output wire is completely assembled
- The lowest cost multi-expansion board based system on the market today
- Supports all major lighting applications
  - Light-o-Rama Advanced (S3/S4/S5)
  - xLights (all)
  - Resolume
  - Madrix
  - Any applications that supports Artnet / sCAN / e1.31 protocols
- All mounted in a single water resistant enclosure
  - Enclosure specifications
Expansion Board Information
- SPI Expansion Board
  - Minimum of 5,440 Pixels or 32 Universes / 16,384 DMX Channels (see CPU type for maximum pixel counts per SPI output)
  - Blown fuse indicators (Red LED light will go out when fuse is blown)
  - Each SPI board has a dedicated temperature and voltage sensor visible from the screen or web interface on the CPU
  - Power Output
    - 5 Amps Maximum (mini fused blade) per output
      - Wattage per output: 60 Watts
- OPTIONAL: Long Range Differential Expansion Board (Expansion Board)
  - Maximum of 5,440 Pixels or 32 Universes / 16,384 DMX Channels (Up to Four Long Range Differential Receiver Boards per Expansion Board)
  - Per Port / CAT5 Cable- Up to 1,360 pixels
  - Supports only pixels that have three wires (data / positive / negative) - this includes support for all HolidayCoro 2811/1903 pixels (no clock wire is present)
  - 300 Feet / 91 meters or greater from expansion board output to receiver input using stand CAT5 network cable
  - Note: Receiver boards must only be used with data input from the Long Range Differential Expansion Board - they cannot be used with DMX 1.11/1990 or E1.31 directly
Support
- The majority of our setup and troubleshooting information and videos can be found on our setup pages
  - AlphaPix Evolution
  - HinksPix Pro
- Support options:
  - Normal Support - Email / Phone where required, no additional cost
  - Priority Support - Dedicate phone number / Remote Control to PC / Email where required, additional cost
- HolidayCoro offers support in the following areas with this controller:
  - General wiring and troubleshooting
  - Testing of pixels (some non-HolidayCoro pixels may have limited support)
  - General setup of the networking needed to support the connection of the controller a Windows PC
  - Basic configuration of sequencing applications
  - Basic configuration of output to the RS485 output ports
  - Complex networking environments
- HolidayCoro does not support the following:
  - Sending data over wireless networks
  - Configuration of some applications (due to the huge number of applications, we may refer you to your application vendor for instructions on setting up their application)
  - Configuration or troubleshooting of individual sequences - please contact your vendor for application specific questions
Physical
- Operating Temperatures - Negative 4f (-20c) to 158f (+70)
County of Origin / Assembly
- China (from globally sourced components)
Country of Design
- AlphaPix: USA / China
- HinksPix: USA
- Flex Expansion: USA / China
- Enclosure: South Korea
- Misc Items: USA