Dumb Controller / 10 RGB EasyPlug4 Outputs / 30 DMX Channels / 350-700 Watts of Power / Ready2Run Assembled

Product Features
This fully assembled package is great for customers that want a pre-assembled dumb controller solution. This kit features:

A 30 Channel Dumb RGB Controller able to handle the following:
- 10 RGB Output Channels
- 30 DMX Channels
- Up to 6 amps of power per RGB output cable or 60 amps per controller total
Weather proof mounting enclosure and mounting plate
One or Two 350w power supplies
- When two power supplies purchased, one power supply per bank of 5 outputs
US, Australia or EU AC input plug (see options above)
Ten pre-attached EasyPlug4 output pigtails (female plug-end) and optionally, ten output pigtails (male plug-end) for connection to lights (pigtails) - see options above
Works with 100% of all Holiday Sequencing Software on the market. See this page for details: https://www.holidaycoro.com/kb_results.asp?ID=122 and other industry standard DMX output devices such as the ActiDongle.

You will need the following items, in-addition to the items purchased in this kit:

DMX Output Source: ActiDongle / AlphaPix Controller (using RS485 outputs - see our Knowledge Base for details) or other 3 party DMX E1.11 / DMX 1990 RS485 based DMX source

This controller is able to directly run the following combinations of dumb RGB lights:

	Maximum Per RGB Output (3 Individual Channels) 6 Amps Total @ 12 Volts	Controller Limit Is Either Per Output Or Per Controller Whichever Comes First	Maximum Per Controller TWO POWER SUPPLIES PER CONTROLLER 58 Amps Total @ 12 Volts
10 Watt RGB Flood Light	6 Floods	<- or ->	60 Floods
30 LED RGB Dumb Strip - 5 meters	2 Rolls (10 meters / 33 feet)	<- or ->	20 Rolls (100 meters / 328 feet)
8mm / 12mm RGB Dumb Node (Single Node)	100 Nodes (50 Nodes per String)	<- or ->	1,000 Nodes (20 Strings of 50 Nodes Each)
Square RGB Module / Rectangle Module	60 Modules	<- or ->	600 Modules

NOTES: The above maximum recommendations can vary based on a variety of factors including - voltage, wire gauge, distance between pixels, temperature, color of light output, customer expectations of color rendering and other factors.