Home > Ready2Run Controllers > Ready2Run Dumb RGB Controllers >

DISCONTINUED: Dumb Controller / 10 RGB EasyPlug4 Outputs / 30 DMX Channels / Up to 350 Watts of Power / Ready2Run Assembled
PRODUCT PHOTO: Dumb Controller / 10 RGB EasyPlug4 Outputs / 30 DMX Channels / Up to 350 Watts of Power / Ready2Run Assembled
Product may differ
due to ongoing improvements
Photo may show optional items
 
Additional Photos:


Our Price: $129.95



Availability / Ships: Same Day, Sporadically up to 3 days (Delivery Time Information)
Product Code: 836


The following items are included with this product:

4 Conductor Pigtail Cables

10 of Male EasyPlug4 Pigtail Cables [Add $10.90]
    - Male not required when purchasing HolidayCoro dumb RGB lights
DMX Data Generation Source To Be Used

I Already Have an Actidongle or Other RS384 Based, E1.11 / DMX 1990 Data Source
1 of ActiDongle - DMX Dongle (Enttec Pro Compatible) [Add $65.49]
Using AlphaPix or EasyLights RS485 Interface  << Click this link for setup information using AlphaPix / EasyLights controllers
NOTE: This dumb controller will not connect directly to the Ethernet (CAT5) jack on a PC or network switch
When using with LOR S3/S4/S5, requires Actidongle (see above) and LOR Advanced edition Software
Pre-Configured Input Voltage & Plug Type

110 / 120v @ 60Hz Input / Type B Plug (United States, Canada, Mexico, Others)
220 / 240v @ 50Hz Input / Type I Plug (Australia, NZ, China)
220 / 240v @ 50Hz Input / Type F Plug (Most of Europe and Russia)
220 / 240v @ 50Hz Input / Type G Plug (United Kingdom / Ireland / Singapore)
220 / 240v @ 50Hz Input / Type B Plug (United States, Canada, Mexico, Others)
    Click here for voltage and plug details
Power Supply - Bank 1 (Ready2Run Systems)

1 of 12v / 350w DC Power Supply / Brand: Meanwell [Add $29.95]
Controller Warranty Period

30 Channel Dumb Controller - 30 Day Factory Defects Only [No Additional Cost]
30 Channel Dumb Controller - 1 Year Hardware Warranty (Ready2Run Assembled) [Add $8.99]
30 Channel Dumb Controller - 3 Year Hardware Warranty (Ready2Run Assembled) [Add $19.99] 
Click here for detailed information about our warranty policy (opens in new tab)
Click here for information on why we offer warranty options (opens in new tab)
  - Warranty period cannot be adjusted after purchase
  - Ready2Run Packages: Extended warranty applies only to controller, standard warranty applies to all other items in package (Pixels, Mounting Hardware, Etc)
 - Controller hardware is identical for all warranty levels
To Plug Unused Female Ends & Pigtails

No Plugs for Unused Female Pigtails
10 of Male EasyPlug3/4 Plugs for Female Pigtails [Add $3.49]832-PS,836,836-PS,839

Qty:  
[Product Description Page] [FAQ & Documentation Page]
 
.
Product Features
This fully assembled package is great for customers that want a pre-assembled dumb controller solution. This kit features:

  • A 30 Channel Dumb RGB Controller able to handle the following:
    • 10 RGB Output Channels
    • 30 DMX Channels
    • Up to 2 amps of power per output or 60 amps per controller - Note that this kit ships with one 29 amp 12v or 60 amp 5v power supply
  • Weather proof mounting enclosure and mounting plate
  • One 350w Watt (29 amps @ 12v / 60 amps @ 5v) power supply (both banks of controller connected) - See options above
  • US or Australia with AC input plug (see options above)
  • Ten pre-attached EasyPlug4 output pigtails (female plug-end) and optionally, ten output pigtails (male plug-end) for connection to lights (pigtails) - see options above
  • Fully compatible with xLights, LOR S3/S4/S5, LightShow Pro, Vixen, Nutcracker, HLS and and other industry standard DMX output devices such as the ActiDongle.
You will need the following items, in-addition to the items purchased in this kit:
This controller is able to directly run the following combinations of dumb RGB lights:

Maximum
Per RGB Output
(3 Individual Channels)
6 Amps Total
@ 12 Volts
Controller Limit
Is Either Per Output
Or Per Controller
Whichever Comes
First
Maximum
Per Controller
(with included power supply)

29 Amps Total
@ 12 Volts
Maximum
Per Controller
(with included power supply
and additional power supply)


58 Amps Total
@ 12 Volts
10 Watt RGB Flood Light 6 Floods <- or -> 30 Floods 60 Floods
30 LED RGB Dumb Strip - 5 meters 2 Rolls
(10 meters / 33 feet)
<- or -> 9 Rolls
(45 meters / 148.5 feet)
20 Rolls
(100 meters / 328 feet)
8mm / 12mm RGB Dumb Node (Single Node) 100 Nodes
(50 Nodes per String)
<- or -> 500 Nodes
(10 Strings of 50 Nodes Each)
1,000 Nodes
(20 Strings of 50 Nodes Each)
Square RGB Module / Rectangle Module 60 Modules <- or -> 300 Modules 600 Modules

NOTES: The above maximum recommendations can vary based on a variety of factors including - voltage, wire gauge, distance between pixels, temperature, color of light output, customer expectations of color rendering and other factors.

You might also be interested in...
CLEARANCE: ActiDongle (tm) - Active DMX Dongle (Enttec Pro Compatible) - V2
Our Price: $65.49
Excluding Optional Support

Add
PRODUCT PHOTO: ActiDongle (tm) - Active DMX Dongle (Enttec Pro Compatible) - V2

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Best option to control dumb DMX December 5, 2018
Reviewer: Ray Cobb from Vicksburg, MS.  
I have built my own controllers when I first started messing with the dumb DMX but in my opinion this is the best option if you need a controller or are adding more to your display. Everything is included and is nice and neat in a protective plastic box. There are some options when you purchase and some  add on’s that you can order with it. This is by far the easiest way to add DMX to your setup because this comes with the controller, power, and pigtails. All you have to do is set the address, run a signal by CAT5 cable, and then attach your dump DMX items to the pigtails. SIMPLE!!!!!! This kit allows you to control 10 different dumb DMX items.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Great for Dumb RGBs May 13, 2018
Reviewer: Fishbulb from Bethesda, MD United States  
We use these to run dumb RGBs on stars and and flood lights. They work great without issue.

Was this review helpful to you?