CableGuard CG-1500 Water Resistant Mounting Box for Controllers and Power Supplies

Home >

DISCONTINUED: CableGuard CG-1500 Water Resistant Mounting Box for Controllers and Power Supplies

PRODUCT PHOTO: CableGuard CG-1500 Water Resistant Mounting Box for Controllers and Power Supplies

Additional Photos:

List Price: $27.99

Our Price: $16.99

You Save: $11.00

Availability / Ships: Currently Unavailable
Product Code: 637

Clamps for Mounting HC-2500 To Pole

No Clamp - I'll be using screws or other methods to mount enclosure
Click here for video of installation (opens in separate tab)
1 Clamp - Round poles Up to 2 Inches in Diameter (Top Only) [Add $1.99]
2 Clamps - Round poles Up to 4.5 Inches in Diameter (Top Only) [Add $3.98]
2 Clamps - Round poles Up to 2 Inches in Diameter (Top and Bottom) [Add $3.98]
4 Clamps - Round poles Up to 4.5 Inches in Diameter (Top and Bottom) [Add $7.96]

Qty:	Email me when this item is available for order

[Product Description Page]

[FAQ & Documentation Page]

NOTICE: DUE TO MANUFACURER PROBLEMS, WE ARE NO LONGER SELLING THE CG-1500 - WE RECOMMEND INSTEAD PURCHASING THE HC-2500

Hands on Demo

Adding cable clamps to common enclosures

How to mount the CG-1500 to a pole using a band clamp

CG-1500 Tips and Tricks

Product Features
The CG-1500 enclosure can be used for a large variety of different projects including controller and power supply mounting.

If mounting common controllers or power supplies, you may wish to also consider our mounting plate bundles to make your project even easier!

If you need a larger enclosure, see our HC-2500 enclosure

Specifications:

Parameter	Values
Dielectric Strength	Minimum 2500 Vrms for 1 minute
Torque (mounting bosses)	20 in./lbs.
High Temperature Storage/Mold Stress °F (°C)	14 days at 159 (70.55)
Temperature Cycling with Humidity °F (°C)	150 day cycling from 40 to 140 (4.44 to 60) with 95% RH
Impact Test °F (°C)	-40 (-40), 5 ft./lbs. on all external surfaces
Drop Test °F (°C)	-40 (-40), 5 ft. (152.4 cm) onto concrete surface 4 times
Rain	24 hours at 10 psi
UV Resistance (Days Exposed)	60 per ASTM-G26-84
Salt Fog (Days Exposed)	60 per ASTM-BLL7-90
Flammability	UL94-5V
Chemical Resistance	30 Days at 100°F and 95% RH Resists chipping and/or cracking when subject to: house paint, wasp spray, sulphuric acid, kerosene and sodium hydroxide
Dimensions (H x W x D) in. (cm)	12.25 x 12 x 5.25 (31.10 x 30.50 x 13.30)
Cable Entrances in. (cm) diameter - Output	5 x 0.625 (1.5)
Cable Entrances in. (cm) diameter - Input	2 x 0.750 (1.9), 1 x 0.650 (0.6) (ground wire)
Covers	Molded-in snap finger and or 3/8" hex head fastener and F term

WARNING: While this housing can be used for mounting controllers and/or power supplies, it is important to understand that these and other devices can generate heat and often significant amounts of heat. When there is sufficient heat trapped within the housing, fire IS possible. It is important to manage heat based on factors including, but not limited to:

Ambient temperature (the heat or lack of heat outside the enclosure)
The efficiency of the controller or power supply which affects the level of waste heat generated by the device
The number and size of controllers and/or power supplies
The frequency and level of usage of the controllers and/or power supplies
The amount of ventilation (the housing comes with no supplied ventilation holes) needed
Over temperature cut-off circuity in controllers and/or power supplies
Ignition temperatures of materials placed in the controller

Note: This housing is not intended for mounting any items into environments that may contain salt air spray such as coastal environments.

NOTE: HolidayCoro reserves the right to limit sales of this item for use with corresponding HolidayCoro hardware or limit large sales of this item based on stock on hand.

Average Rating: Average Rating: 5 of 5