Home >

DISCONTINUED: Dumb RGB 3 Channel DMX Controller / Decoder / Screw Terminals / DIP Switch Addressing
PRODUCT PHOTO: Dumb RGB 3 Channel DMX Controller / Decoder / Screw Terminals / DIP Switch Addressing
Container sold separately
  
Additional Photos:
Single Controller Price: $10.94


Availability / Ships: DISCONTINUED
Product Code: 37
Qty:



The following items are included with this product:
[Product Description Page] [FAQ & Documentation Page]
 
This product has been replaced with this item: http://www.holidaycoro.com/3-Channel-DMX-RGB-Controller-DIP-Switch-Addressing-p/27.htm
Hands on with the controller
How to Measure
Current Draw of RGB Lights
Product Features
  • General Product Information
    • Basic / Dumb control over elements that use RGB lights that do not need individual control. Element examples would include:
      • MegaTrees
      • Arch/Fans
      • Flood lights
    • DMX addressing:
      • DIP Switch addressable directly on board (1 to 512 channels)
      • See chart in our Knowledge Base
      • When controller does not have a DMX data stream on the input (not hooked up to a DMX output device), the controller can be configured to output a test/demo sequence built into the controller by turning DIP switch 10 to the on position
    • Three mounting holes in board (.137” or 1/8”) – two on the output side, one on the input side
    • Great for use in centralized controller elements
    • All Screw terminals for power/signal input and output
    • LED Indicator for DMX signal
  • Included, optional and customer supplied items
    • Items included with this item/product/bundle:
      • One DMX Controller
      • DMX Switch setting instructions / chart
    • Required items for operation:
      • RGB lights (basic/dumb) – will not work with individually controlled pixel lights. See our FAQ page for information on how to determine how many RGB lights can be controlled from each controller.
      • Power supply (see our FAQ page for information about how large of a power supply you will need for your project / element.)
      • DMX signal source / dongle (see below)
      • DMX generating software (see below)
    • Optional items
      • Mounting (screws, bolts, two sided tape or other)
    • Customer supplied tools or items:
  • Assembly Instructions:
    • None
  • Estimated assembly time:
    • First unit: Varies / for DIY / Custom Projects
  • Technical Specifications
    • Color: None / Green Board with white silk screen
  • Dimensions & Weight
    • Complete product (overall)
      • Per: 0.05 pounds (1/2 oz)
      • Height: .84"
      • Width: 3.53"
      • Depth: 1.20"
      • Temperature Range
        • Operation: 10 to 110 degrees Fahrenheit
        • Storage: -20 to 140 degrees Fahrenheit
  • Material Composition
    • Case: Optional - see the product options on this page.
    • Wires: None – screw terminals.
  • County of Origin
    • Materials/parts: China
    • Assembly: China
    • Design: China
  • Certifications & Approvals
    • Underwriters Laboratories (UL) Certified/Recognized/Approved: No
    • CE: No
    • ROHS (Lead Free): No / Unknown or not certified
  • Compatibility
    • All DMX512 output devices including:
      • HolidayCoro ActiDongle
      • Enttec Open
      • Enttec Pro
      • LOR USB “Dongle” (varies)
      • DIYLA Lync Dongle
      • DMX King
      • LOR iDMX-1000
      • SanDevices ELOR
      • Any standard DMX512 / 1990 output device
  • Power / Signal / Wiring
    • DMX input (see our Knowledge Base for wiring details)
      • Protocol: DMX512/1990
      • Signalling System: RS-485
      • Connector: Screw terminals (connections marked on bottom side of board)
        • D'-' / Solid Orange / PIN 2
        • GND / Ground (not required)
        • D'+' White/Orange / PIN 1
    • Power input
      • Voltage Range: 12 to 24v DC
      • Connector: Screw terminals (connections marked on bottom side of board)
        • +9-24V / Positive 12v
        • GND / Negative 12v
    • Signal (PWM) output:
      • Dimming Levels / Steps: 8 Bit / 256 (DMX Maximum)
      • Up to 2 amps per channel (6 amps per controller total)
      • Connector: Screw terminals (connections marked on bottom side of board)
        • R'-' = Red Negative
        • G'-' = Green Negative
        • B'-' = Blue Negative
        • +COM = Common Positive
Per RGB Channel / Controller
(3 DMX Channels)
Directly powered with 6amp Power supply and no less than 20ga Wiring
Per RGB Channel / Controller
(3 DMX Channels)
Wiring over CAT5
w/24ga Wires (3 pairs/6 wires)
100 Nodes
6,000mA or 6amps per RGB group / 60ma per node with white output

50 Nodes

3,000mA or 3amps per RGB group / 60ma per node with white output
RGB Rectangle & Square
Dumb / Basic Modules
60 Modules
6,000mA or 6amps per RGB group / 100ma
per module with white output
30 Modules
3,000mA or 3amps per RGB group / 100ma
per module with white output

RGB Dumb / Basic Strip

46 Feet
6,000mA or 6amps per RGB group /130ma
per foot with white output
23 Feet
3,000mA or 3amps per RGB group /130ma
per foot with white output

  • Warranty & Support
    • Warranty period
      • 60 days from date of purchase OR until December 31st of the year in which the product was purchased. For complete information, see our warranty details.
  • Customization: No
  • Product Revision history
    • Revision 2.0 / 15-Sept-2008

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 23 Write a review »

  0 of 0 people found the following review helpful:
 
4 of 5 this is as defined, a dumb controller,but works February 9, 2017
Reviewer: mar02io from Wentzville, MO United States  
I had to purchase a smart interface(e1.31 bridge to DMX).  Once I connected it to the dumb controller, all of my dumb led pixel bulbs functioned properly.  The dumb controller board is well built with good output drivers.  All is working fine.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 review August 7, 2016
Reviewer: Joe Countryman from Merrill, WI United States  
Works great!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Easy to hook up July 26, 2016
Reviewer: Jonathan Fanselau from Edmond, OK United States  
Works as expected.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Easy to use April 21, 2016
Reviewer: Mark Bell from South Euclid, OH United States  
I got this controller in the mail, and between the screw terminals and easy address setting, I was blinking lights in minutes. Thanks!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent Service January 12, 2016
Reviewer: Bill Poteat from Morganton, NC United States  
Everything ordered has arrived in good condition and in a timely manner

Was this review helpful to you?

View All Customer Reviews